64 groups can be set,
RF transmission distance: up to 20m in open area.
Master/slave signal transfer: When one light is triggered, it emits the signal to other lights in the same group, and triggers the other lights on.
Stand-by dim: After a pre-set time the lighting ahead switches to dim, and comes into stand-by status.
Identify the ambient brightness: auto start dimming mode at night without motion signal, auto exit when ambient light is over the selected lux, or switches the light off after the setted dimming holding time.
Technical Data:
Item No.
|
TA-WB800
|
Input voltage
|
220-240V/AC, 110-130V/AC
|
Rated Loading
|
LED 16W
|
Power frequency
|
50/60Hz
|
Installation sit
|
Indoors, ceiling mounting
|
Transmission power
|
<0.2mW
|
Working temperature
|
-15° C~+70° C
|
Power consumption
|
Approx. 0.5W.
|
IP Rating
|
IP20
|
HF system
|
5.8GHz CW radar, ISM band
|
Adjustment Type
|
Dip
|
Light Control
|
10LUX.30LUX.50LUX.DAY
|
Detection
angle
|
360°
|
Radio Linking
Range
|
30m Radio
|
Detect Distance (radii.)
|
2m, 5m, 8m,10m
|
Time delay
|
10sec, 1min, 3min, 5min
|
Detection angle
|
360°
|
Dimmable:
The dimmable lights are added a light down function between the light is 100% switched on and switch off.
It reduces the brightness of light when nobody there at a pre-set time. (The user can set up the brightness by themselves according to the actual usage).
If there is no motion in the stand-by time, the sensor turns off the light to save the energy. When somebody comes, the sensor will quickly turn on the light into full-brightness status. With this function the light can be extended the lifetime.